Vehicle Control Automation Functional Area
Description
'Vehicle Control Automation' provides lateral and/or longitudinal control of a vehicle to allow 'hands off' and/or 'feet off' driving, automating the steering, accelerator, and brake control functions. It builds on the sensors included in 'Vehicle Safety Monitoring' and 'Vehicle Control Warning' and uses the information about the area surrounding the vehicle to safely control the vehicle. It covers the range of incremental control capabilities from driver assistance systems that take over steering or acceleration/deceleration in limited scenarios with direct monitoring by the driver to full automation where all aspects of driving are automated under all roadway and environmental conditions.
Included In
Functional Requirements
| ID | Requirement |
|---|
| 01 | The vehicle shall monitor the area behind and in front of the vehicle to determine the proximity of other objects to the vehicle. |
|---|
| 02 | The vehicle shall monitor the area to the sides of the vehicle to determine the proximity of other objects to the vehicle. |
|---|
| 03 | The vehicle shall evaluate the likelihood of a collision between two vehicles or a vehicle and a stationary object, based on the proximity of other objects to the vehicle and the current speed and direction of the vehicle. |
|---|
| 04 | The Vehicle shall provide its location with lane–level accuracy to on–board applications. |
|---|
| 05 | The vehicle shall evaluate the likelihood of a collision between two vehicles or a vehicle and a stationary object, based on the proximity of other objects to the vehicle, roadway characteristics, and the current speed and direction of the vehicle. |
|---|
| 06 | The vehicle shall provide position warnings to the driver when an object gets close enough to the vehicle to become a hazard if no action is taken by the driver. |
|---|
| 07 | The vehicle shall provide an interface through which a vehicle driver can initiate, monitor and terminate automatic control of the vehicle. |
|---|
| 08 | The vehicle shall send appropriate control actions to the vehicle's steering actuators. |
|---|
| 09 | The vehicle shall present information to the driver in audible or visual forms without impairing the driver's ability to control the vehicle in a safe manner. |
|---|
| 10 | The vehicle shall perform control actions based on information received from other vehicles regarding potentially hazardous road conditions or road hazards. |
|---|
| 11 | The vehicle shall perform pre–crash actions, including seatbelt tightening, brake assist, airbag pre–arming, bumper raising/extension. |
|---|
| 12 | The vehicle shall be capable of performing control actions based upon warnings received from nearby special vehicles. |
|---|
| 13 | The vehicle shall be capable of performing control actions based upon warnings received regarding pedestrians, cyclists, and other non–motorized users that are sharing the roadway with the vehicle |
|---|
| 14 | The vehicle shall be capable of performing control actions based upon information received from the infrastructure regarding the status of the intersection the vehicle is approaching. |
|---|
| 15 | The vehicle shall be capable of performing control actions based upon information received from other vehicles regarding their status approaching the intersection the vehicle is approaching. |
|---|
| 16 | The vehicle shall send appropriate control actions to the vehicle's speed control systems (e.g., throttle, brakes). |
|---|